{"success":true,"data":{"author":"Stiehl et al. (original); Parquet conversion by alpha-by-beta","bucketAccessType":"public","bucketName":"alpha-by-beta/Multivariate_time_series_data_of_milling_processes_with_varying_tool_wear_and_machine_tools","bucketPrefix":"","category":"Machine Learning & AI","cloudProvider":"huggingface","createdAt":"2026-11-18T00:06:05.920Z","description":"Labeled multivariate time series of shoulder milling with progressive tool wear on three different 5-axis milling centers, for tool wear estimation, tool life prediction and cross-machine transfer learning. Nine solid carbide end mills (4 edges, TiN-TiAlN coated, same model, different batches) were worn from new to end of life (flank wear land VB about 150 micrometers) in 3-axis shoulder milling of cast iron 600-3/S, with VB measured by digital microscope at 100x. Process forces were recorded with a dynamometer at 25 kHz; spindle and feed drive torques or forces, tool position and position control deviation came from the machine controls at 500 Hz. Labels per run are machine, tool, run number, cumulated tool contact time and wear. The original 6,418 files are flattened here into a single dataset.parquet (about 23 GB) readable with pandas, polars or pyarrow. Original data by Stiehl et al. on Mendeley Data under CC BY 4.0; cite doi:10.17632/zpxs87bjt8.3 and the Data in Brief article doi:10.1016/j.dib.2023.109574.","displayTitle":"Milling Tool Wear Time Series across Three Machine Tools (Flank Wear VB, Forces, Spindle Torque)","doi":"10.17632/zpxs87bjt8.3","huggingFaceUrl":"https://huggingface.co/datasets/alpha-by-beta/Multivariate_time_series_data_of_milling_processes_with_varying_tool_wear_and_machine_tools","id":"3d0491ec-166c-5b10-a109-f8a4812a8c87","license":"CC-BY-4.0","licenseEvidenceUrl":"https://data.mendeley.com/datasets/zpxs87bjt8/3","objectCountEstimate":3,"probeStatus":"ok","referenceUrl":"https://doi.org/10.1016/j.dib.2023.109574","region":"us","schemaCard":{"accessHints":[{"language":"python-datasets","snippet":"from datasets import load_dataset\nds = load_dataset(\"alpha-by-beta/Multivariate_time_series_data_of_milling_processes_with_varying_tool_wear_and_machine_tools\")"},{"language":"python-hub","snippet":"from huggingface_hub import snapshot_download\nsnapshot_download(repo_id=\"alpha-by-beta/Multivariate_time_series_data_of_milling_processes_with_varying_tool_wear_and_machine_tools\", repo_type=\"dataset\")"}],"caveats":["HuggingFace metadata: author=alpha-by-beta, license:cc-by-4.0, size_categories:1K<n<10K, format:parquet, downloads=393"],"format":"mixed","generatedAt":"2026-11-18T00:10:01.014Z","layout":{"example":"dataset.parquet","pattern":"{repoId}/{filename}"},"mountPath":"/mnt/archive","sampleHeaders":[{"bytes":"5041523115041508150c4c15021500120000040c010000001500151215162c156a15101506150600000920020000006a01016a0015041508150c4c15021500120000040c010000001500151215162c156a15101506150600000920020000006a01016a00150415a80315b0034c156a1500120000d401f0d30100000002000000030000000400000005000000060000000700000008000000090000000a0000000b0000000c0000000d0000000e0000000f000000100000001100000012000000130000001400000015000000160000001700000018000000190000001a0000001b0000001c0000001d0000001e0000001f000000200000002100000022000000230000002400000025000000260000002700000028000000290000002a0000002b0000002c0000002d0000002e0000002f0000003000000031000000320000003300000034000000350000001500156415682c156a151015061506000032c4020000006a01060f40200c44611c48a22c4ce33c50244d54655d58a66d5ce77d60288e64699e68aaae6cebbe702ccf340000150415a80315b0034c156a1500120000d401f0d30000304100007041000098410000b8410000d8410000f84100000842000060420000704200007c420000864200008e420000964200009e420000a6420000ae420000b4420000bc420000c4420000cc420000d4420000fc42000002","encoding":"hex","key":"dataset.parquet","truncatedAt":512}],"sampleObjects":["dataset.parquet"],"sidecars":[{"bytes":"---\nlicense: cc-by-4.0\nlanguage:\n- en\ntags:\n- engineering\n- manufacturing\n- Time Series Analysis\n- milling\n- tool wear\n- machine tools\n- Transfer learning\nsize_categories:\n- 1K<n<10K\n---\n## Flattened version of the \"Multivariate time series data of milling processes with varying tool wear and machine tools\" dataset in the .parquet file format. Original dataset: https://doi.org/10.17632/zpxs87bjt8.3 and original paper: https://doi.org/10.1016/j.dib.2023.109574\n\n\n## Description\nThe presented dataset provides labeled, multivariate time series data of milling processes with varying tool wear and for varying machine tools. The width of the flank wear land VB of peripheral cutting edges is used as a degradation metric. A total of nine end milling cutters were worn from an unused state to end of life (VB ≈ 150 μm) in 3-axis shoulder milling of cast iron 600-3/S. The width of the flank wear land VB was frequently measured with a digital microscope at a magnification of 100x. The tools were of the same model (solid carbide end milling cutter, 4 edges, coated with TiN-TiAlN) but from different batches. Experiments were conducted on three different 5-axis milling centers of a similar size. Workpieces, experimental setups, and process parameters were identical on all of the machine tools. The process forces were recorded with a dynamometer with a sample rate of 25 kHz. The force or torque of the spindle and feed drives, as well as the position control deviation of feed drives, were recorded from the machine tool controls with a sample rate of 500 Hz. The dataset holds a total of 6,418 samples labeled with the machine tool, tool, run, cumulated tool contact time and tool wear. This data could be used to identify signal features that are sensitive to tool wear, to investigate methods for tool wear estimation and tool life prediction, or to examine transfer learning strategies.\n\n\n## Labels (columns 1 to 5)\n| Label | Description | Unit | Range |\n|-------|-------------|------|----------|\n| machine | Number of machine tool | – | 1–3 |\n| tool    | Number of tool | – | 1–9 |\n| run     | Counter of experimental runs recorded for each tool; Only successfully recorded runs are counted; A run is a single shoulder milling operation | – | 1–928 |\n| cumulated_tool_contact_time | Time a tool has actually been machining material before the current run | s | 0–5181 |\n| wear    | The width of the flank wear land VB of the tool | µm | 0–160 |\n\n\n## Time series (columns 6 to 22), availability indicated by \"x\"\n| Name of signal                        | Unit | Source  | Machine 1 | Machine 2 | Machine 3 |\n|---------------------------------------|------|---------|----|----|----|\n| time_machine                           | s    | machine | x  | x  | x  |\n| position_control_deviation_axis_x      | µm   | machine | x  | x  | x  |\n| position_control_deviation_axis_y      | µm   | machine | x  | x  | x  |\n| tool_position_x                        | mm   | machine | x  | x  | x  |\n| tool_position_y                        | mm   | machine | x  | x  | x  |\n| tool_position_z                        | mm   | machine | x  | x  | x  |\n| torque_spindle                         | Nm   | machine | x  | x  | x  |\n| torque_axis_x                          | Nm   | machine | x  |    |    |\n| torque_axis_y                          | Nm   | machine | x  |    |    |\n| torque_axis_z                          | Nm   | machine | x  |    |    |\n| force_axis_x                           | N    | machine |    | x  | x  |\n| force_axis_x                           | N    | machine |    | x  | x  |\n| force_axis_x                           | N    | machine |    | x  | x  |\n| time_sensor                            | s    | sensor  | x  | x  | x  |\n| force_sensor_x                         | N    | sensor  | x  | x  | x  |\n| force_sensor_y                         | N    | sensor  | x  | x  | x  |\n| force_sensor_z                         | N    | sensor  | x  | x  | x  |\n\n\n## Time References\n\nSignals were recorded with different sample times. Two time references exist:\n- **time_","encoding":"utf8","key":"README.md","name":"README.md","size":4579,"truncated":true}],"sourceObjectKey":"dataset.parquet","starterCell":"from datasets import load_dataset\nds = load_dataset(\"alpha-by-beta/Multivariate_time_series_data_of_milling_processes_with_varying_tool_wear_and_machine_tools\")\nprint(ds)","starterSamplePath":"dataset.parquet","totalObjects":3},"summary":"Labeled multivariate time series of shoulder milling with progressive tool wear on three different 5-axis milling centers, for tool wear estimation, tool life prediction and…","title":"Milling Tool Wear Time Series across Three Machine Tools (Flank Wear VB, Forces, Spindle Torque)","updatedAt":"2026-11-18T04:11:36.113Z","visibility":"public","websiteUrl":"https://huggingface.co/datasets/alpha-by-beta/Multivariate_time_series_data_of_milling_processes_with_varying_tool_wear_and_machine_tools"}}